ppe

Ventrac Tractors for Sale


  • Spartan
  • Hustler
  • Stihl
  • Ariens
  • Toro
  • Gravely
  • Roxor
  • Mahindra
  • Ventrac
  • Ventrac Attachments
  • BobCat
  • Boxer
  • Dixon
  • Genie
  • Honda
  • Husqvarna
  • Hydro Mobile
  • Pettibone
  • RedMax
  • Multiquip
  • Mantis
  • Mustang
  • Mule
  • Reechcraft
  • Branson
  • Solectrac
  • Merlo
  • Intimidator
  • Envy
  • Walker
  • TYM
  • EZG Manufacturing
  • Boss
  • Echo
  • Exmark
  • Schäffer
  • XCMG
  • Kress

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

  • SSV 2120

    SSV 2120

  • 4520K

    4520K

  • ventrac 4520y

    4520Y

  • ventrac 4520z

    4520Z

  • 4520p

    4520P

  • 4500Z

    4500Z

  • 4500Y

    4500Y

  • 4500P

    4500P

  • 4500K

    4500K

  • SSV 2100

    SSV 2100

SSV 2120

SSV 2120

  • Vanguard 23hp Gas engine
  • 8mph top speed
  • Sealed connectors and moisture resistant gauges as well as a Tractor Control Module (TCM) for easy electrical diagnostics
  • 34" width machine to fit the smallest sidewalk without turf damage

Starting at $15,420

Financing Available

The Ventrac SSV makes it easy and efficient to manage snow and ice on sidewalks. The SSV is a dedicated Sidewalk Snow Vehicle with an 34″ width in order to allow access to the tightest areas of any property. The SSV allows more reduction of hand labor and walk-behind equipment than ever before.

4520K

4520K

  • Vanguard 31hp Gas Air-Cooled engine
  • Safe operation slope rating of 30 degrees or a 58% grade with dual wheel kit
  • Sealed electrical system and on-board diagnostic system
  • Does not Include: front fenders, foot pegs, 4 rear weights, weight transfer

Starting at $26,470

Financing Available

Through Ventrac’s advanced engineering and design efforts, the best mix of machine performance, operator experience, and durability has come together in the new 4520 tractor.

4520Y

4520Y

  • Kubota 25hp Diesel Liquid-Cooled engine
  • Safe operation slope rating of 30 degrees or a 58% grade with dual wheel kit
  • Sealed electrical system and on-board diagnostic system
  • Includes: front fenders, foot pegs, 4 rear weights, weight transfer

Starting at $31,070

Financing Available

Through Ventrac’s advanced engineering and design efforts, the best mix of machine performance, operator experience, and durability has come together in the new 4520 tractor.

4520Z

4520Z

  • Kubota 32hp Gas 3LC Liquid-Cooled engine
  • Safe operation slope rating of 30 degrees or a 58% grade with dual wheel kit
  • Sealed electrical system and on-board diagnostic system
  • Includes: front fenders, foot pegs, 4 rear weights, weight transfer

Starting at $31,070

Financing Available

Through Ventrac’s advanced engineering and design efforts, the best mix of machine performance, operator experience, and durability has come together in the new 4520 tractor.

4520P

4520P

  • Kawasaki 31hp DFI Gas Liquid-Cooled engine
  • Safe operation slope rating of 30 degrees or a 58% grade with dual wheel kit
  • Sealed electrical system and on-board diagnostic system
  • Includes: front fenders, foot pegs, 4 rear weights, weight transfer

Starting at $29,795

Financing Available

Through Ventrac’s advanced engineering and design efforts, the best mix of machine performance, operator experience, and durability has come together in the new 4520 tractor.

4500Z

4500Z

  • 32hp 3-Cylinder Liquid Cooled Kubota Gas engine
  • Safe operation slope rating of 30 degrees or a 58% grade with dual wheel kit
  • Sealed connectors and moisture resistant gauges as well as a Tractor Control Module (TCM) for easy electrical diagnostics
  • Includes standard: Weight Transfer, SDLA Hand Controls, 4 Rear Weights, Front Fenders, Foot Pegs

Starting at Call For Pricing

Financing Available

It only takes one test drive on this incredibly agile, yet power-packed tractor and you’ll know that the Ventrac 4500 is in a class of its own. An innovative design combines all-wheel drive, the Ventrac FlexFrame, and powerful engines to give you unmatched stability and control to get work done.

4500Y

4500Y

  • Kubota 25hp Diesel Liquid-Cooled engine
  • Safe operation slope rating of 30 degrees or a 58% grade with dual wheel kit
  • Sealed connectors and moisture resistant gauges as well as a Tractor Control Module (TCM) for easy electrical diagnostics
  • Includes standard: Weight Transfer, SDLA Hand Controls, 4 Rear Weights, Front Fenders, Foot Pegs

Starting at Call For Pricing

Financing Available

Choose from over 30 professional grade Ventrac Mount attachments to transform your Ventrac into a productivity powerhouse. This incredibly rugged and dependable machine is a wise business investment for golf courses, schools and universities, parks, street maintenance departments, commercial mowing services, contractors, wineries, farms, property owner associations, estate homes and anyone needing ONE machine to do it all.

4500P

4500P

  • Kawasaki 31hp DFI Gas* Liquid-Cooled engine
  • Safe operation slope rating of 30 degrees or a 58% grade continuously with dual wheel kit
  • Sealed connectors and moisture resistant gauges as well as a Tractor Control Module (TCM) for easy electrical diagnostics
  • Includes standard: Weight Transfer, SDLA Hand Controls, 4 Rear Weights, Front Fenders, Foot Pegs

Starting at Call For Pricing

Financing Available

Choose from over 30 professional grade Ventrac Mount attachments to transform your Ventrac into a productivity powerhouse. This incredibly rugged and dependable machine is a wise business investment for golf courses, schools and universities, parks, street maintenance departments, commercial mowing services, contractors, wineries, farms, property owner associations, estate homes and anyone needing ONE machine to do it all.

4500K

4500K

  • Vanguard 31hp Gas Air-Cooled engine
  • Safe operation slope rating of 30 degrees or a 58% grade with dual wheel kit
  • Sealed connectors and moisture resistant gauges as well as a Tractor Control Module (TCM) for easy electrical diagnostics
  • Does not include: Weight Transfer, 4 Rear Weights, Front Fenders, Foot Pegs

Starting at Call For Pricing

Financing Available

Choose from over 30 professional grade Ventrac Mount attachments to transform your Ventrac into a productivity powerhouse. This incredibly rugged and dependable machine is a wise business investment for golf courses, schools and universities, parks, street maintenance departments, commercial mowing services, contractors, wineries, farms, property owner associations, estate homes and anyone needing ONE machine to do it all.

SSV 2100

SSV 2100

  • Kawasaki 18.5hp Gas Air-Cooled engine
  • 8mph top speed
  • Sealed connectors and moisture resistant gauges as well as a Tractor Control Module (TCM) for easy electrical diagnostics
  • 34" width machine to fit the smallest sidewalk without turf damage

Starting at Call For Pricing

Financing Available

The Ventrac SSV 2100 makes it easy and efficient to manage snow and ice on sidewalks. The SSV is a dedicated Sidewalk Snow Vehicle with an industry-first 36″ width in order to allow access to the tightest areas of any property. The SSV allows more reduction of hand labor and walk-behind equipment than ever before. It’s also designed with a full arsenal of commercial quality snow removal attachments and de-icing options that are engineered to provide a system that can handle any winter storm.

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

  • EB480C

    EB480C

  • EB480F

    EB480F

  • EB480S

    EB480S

  • KD482

    KD482

  • KD602

    KD602

  • ED202

    ED202

  • HE482

    HE482

  • KR502

    KR502

  • KV552

    KV552

  • SA250

    SA250

  • ND420

    ND420

  • ND540

    ND540

  • NJ380

    NJ380

  • NX340

    NX340

  • NE380

    NE380

  • NA130

    NA130

  • EC240

    EC240

  • MJ840

    MJ840

  • MR740

    MR740

  • KX523

    KX523

  • KX480

    KX480

  • KC220

    KC220

  • KL480

    KL480

  • HQ682

    HQ682

  • KW452

    KW452

  • KH500

    KH500

  • RV602

    RV602

  • ET202

    ET202

  • KY400

    KY400

  • ES220

    ES220

  • KA160

    KA160

  • KJ520

    KJ520

  • HB580

    HB580

  • EF300

    EF300

  • MS600

    MS600

  • MS720

    MS720

  • MT720

    MT720

  • MU720

    MU720

  • MA900

    MA900

  • MK960

    MK960

  • EA600

    EA600

  • DG550

    DG550

  • DR540

    DR540

  • KD722

    KD722

EB480C

EB480C

  • Equipped With Ventrac Mount System
  • Core Tine Removes plugs to reduce thatch and compaction
  • Core removal areating helps to encourage a healthy population of microorganisms
  • Top Speed 8mph

Starting at call for price

The Ventrac EB480 Aerator offers the exact tools to address your turf grass conditions. No matter what aeration treatment your turf requires, coring, slicing, or fracturing, the EB480 can be easily configured to suit your requirements. The tines are replaced either individually or by quickly changing the entire mounting heads. This gives the EB480 both versatility and longevity to best accommodate your needs.

EB480F

EB480F

  • Equipped With Ventrac Mount System
  • Open Spoon Aerating allows areation on shallow firm surfaces
  • Spoon aerating removes some material and breaks up thatch to help population of Microorganisms
  • Top Speed 9mph

Starting at call for price

The Ventrac EB480 Aerator offers the exact tools to address your turf grass conditions. No matter what aeration treatment your turf requires, coring, slicing, or fracturing, the EB480 can be easily configured to suit your requirements. The tines are replaced either individually or by quickly changing the entire mounting heads. This gives the EB480 both versatility and longevity to best accommodate your needs.

EB480S

EB480S

  • Equipped With Ventrac Mount System
  • Least amount of damage to turf during areation process
  • little to no cleanup needed while still getting thatch breakup and microorganism population control
  • Top Speed 10mph

Starting at call for price

The Ventrac EB480 Aerator offers the exact tools to address your turf grass conditions. No matter what aeration treatment your turf requires, coring, slicing, or fracturing, the EB480 can be easily configured to suit your requirements. The tines are replaced either individually or by quickly changing the entire mounting heads. This gives the EB480 both versatility and longevity to best accommodate your needs.

KD482

KD482

  • Equipped With Ventrac Mount System
  • 48 inch straight blade with Power Angle
  • Operatable in trip or locked for plowing or grading
  • PolyEdge availible

Starting at call for price

Ventrac KD Power Angle Blades have working widths of 48, 60, and 72 inches (122, 152, 183 centimeters). All control functions are performed with the S.D.L.A. control for raising and lowering the blade or angling it left or right. Adjustable skid shoes accommodate dozing at selected heights, such as moving snow on gravel driveways.

KD602

KD602

  • Equipped With Ventrac Mount System
  • 60 inch straight blade with power angle
  • Operatable in trip or locked for plowing or grading
  • PolyEdge availible

Starting at call for price

Ventrac KD Power Angle Blades have working widths of 48, 60, and 72 inches (122, 152, 183 centimeters). All control functions are performed with the S.D.L.A. control for raising and lowering the blade or angling it left or right. Adjustable skid shoes accommodate dozing at selected heights, such as moving snow on gravel driveways.

ED202

ED202

  • Equipped With Ventrac Mount System
  • Maximum cutting depth 6"
  • Edging compatible for either right or left side
  • optional mount for KA160 blower to remove debris while edging

Starting at call for price

The ED202 Edger is designed to edge sidewalks, curbs, and cart paths as well as edging and maintaining flower and mulch beds. Edging can be done on either the right or left side per the operator’s choice.

HE482

HE482

  • Equipped With Ventrac Mount System
  • 48" working width
  • Hydraulic rotation and dump
  • optional hydrauilcly operated grappel, bucket extentions, and bucket teeth

Starting at call for price

The Ventrac PowerBucket is a must for any Ventrac owner. The power buckets are great for transporting material such as soil, sand, gravel, mulch, debris, snow, and much more. Used for landscaping, excavation, back-filling, leveling, digging and grading, the Power Buckets are an indispensable attachment from construction sites to your own backyard, allowing you to say goodbye to your old wheelbarrow.

KR502

KR502

  • Equipped With Ventrac Mount System
  • Up to 69" working width
  • Rear or front mounted for multiple uses
  • 3" digging depth

Starting at call for price

The 49-inch Ventrac KR Landscape Rake performs a variety of landscaping tasks. From soil preparation, leveling ground, to removing rocks and debris, the KR502 works with ease and efficiency.

KV552

KV552

  • Equipped With Ventrac Mount System
  • Working width 48" to 55"
  • Mechanical adjusted trip function with lockout option
  • PolyEdge availible for the most delicate snowremoval

Starting at call for price

The 55 inch Ventrac KV552 V-Blade Snow Plow maximizes efficiency with the ability to quickly change from V plow to Scoop to straight blade, all from the convenience of Ventrac’s exclusive S.D.L.A. control system. With a 48″ V width, the KV552 is ideal for walks and areas that larger blades are unable to plow.

SA250

SA250

  • Mount on standard 2" receiver
  • Standard capacity 200 lb
  • Stainless Steel construction to elimate rust
  • Wirelessly remote controlled 5 speed for ease of operation in cab

Starting at call for price

The Ventrac Sidewalk Drop Spreader is the ultimate tool for spreading an array of deicing materials with precision flow control. Designed with a narrow frame and a 40″ drop pattern, this spreader is ideal for spreading material on sidewalks and other narrow walkways.

ND420

ND420

  • 42" working width
  • 36" angled width for the smallest sidewalks
  • Self aligning quick attach hitch
  • Poly Edge available

Starting at Call For Pricing

Ventrac ND Snow Plow Blades have working widths of 42 and 54 inches (107, 137centimeters). Adjustable skid shoes accommodate dozing at selected heights, such as moving snow on gravel driveways.

ND540

ND540

  • 54" working width
  • 47" angled width
  • Self aligning quick attach hitch
  • Poly Edge availible

Starting at call for price

Ventrac ND Snow Plow Blades have working widths of 42 and 54 inches (107, 137centimeters). Adjustable skid shoes accommodate dozing at selected heights, such as moving snow on gravel driveways.

NJ380

NJ380

  • 38" working width
  • 35" angled working width
  • Self aligning quick attach hitch
  • 21" broom diameter for extended life

Starting at call for price

The NJ380 Power Broom for the Ventrac SSV, features a working width of 38-inches and an angled width of 35-inches, making it a perfect solution for cleaning snow and debris from sidewalks and walkways.

NX340

NX340

  • 228 Degree hydraulicly operated chute
  • 34" working width
  • Self aligning quick attach hitch
  • 30' blowing distance

Starting at call for price

The 34″ wide Ventrac NX340 Snow Blower is built for commercial snow clearing operations of sidewalks, driveways, and other areas. A two stage snow blower, the NX340 features a 12-3/16″ diameter solid auger for best snow transfer, a large 18″ diameter fan, and the ability to move pounds of snow per minute at distances up to 30 feet. Standard features include adjustable cast iron skid shoe discs at the rear, high carbon hardened steel shoes at the side, and a reversible high carbon hardened steel cutting edge.

NE380

NE380

  • 38" working width
  • 4.75 cubic feet 200lb capacity
  • Self aligning quick attach hitch
  • Hydraulic controlled

Starting at call for price

The snow buckets are great for transporting material such as soil, sand, gravel, mulch, debris, snow, and much more. Great landscaping, excavation, back-filling, leveling, digging and grading, the Power Buckets are an indispensable attachment from construction sites to your own backyard, allowing you to say goodbye to your old wheelbarrow.

NA130

NA130

  • 29" drop width
  • 100 lb material capacity
  • Stainless steel design prevents rust and corrosion
  • Innovated agitation system keeps material from bridging and eliminates the need of noisy vibrators

Starting at call for price

The Ventrac SSV Sidewalk Drop Spreader is the ultimate tool for spreading an array of deicing materials with precision flow control. Designed with a narrow frame and a 34″ drop pattern, this spreader is ideal for spreading material on sidewalks and other narrow walkways using the Ventrac SSV.

EC240

EC240

  • Equipped With Ventrac Mount System
  • Cutting Depth 0" to 2 1/2"
  • 24" cutting width
  • Light weight 38 lb easy storage

Starting at call for price

The Ventrac Sod Cutter is ideal for landscapers, homeowners, golf courses and others looking for an easy way to cut sod. The 24-inch knife cleanly cuts the sod for flower beds, walkways, and lawns. With a cutting depth of 0 to 2-1/2 inches, the Sod Cutter can be used to cut thick lush grass or shave off dirt for work site preparation or an irrigation trenching job..

MJ840

MJ840

  • Equipped With Ventrac Mount System
  • 83"mowing width with 3 rear discharge independent decks
  • 40 Degree range of motion in wing decks
  • Full length rollers on each independent deck prevent scalping on the most difficult terrain

Starting at call for price

Ventrac’s Contour Mower features a 83 inch working width making quick work of precision mowing on high end properties. Three decks float independently and follow the contour of the terrain with up to 40 degrees of motion for each side deck. The MJ840 also features full rear rollers for even cutting and striping, rear discharge, and a flip-up deck design.

MR740

MR740

  • Equipped With Ventrac Mount System
  • 74" Tri-Plex reel design
  • 30 Degree mowing with ajustable frequency of clip and Reel type finish
  • Cutting heights .3937 - 2.3622 with adjustable front and rear rollers for infinite cutting positions

Starting at call for price

When powered by the all-wheel drive Ventrac 4500 tractor with dual wheels, the MR740 can be operated on hills and slopes up to 30 degrees — allowing you to go where no other reel mower can go. You will be amazed at the time and labor you’ll save, and the beauty you’ll leave behind.

KX523

KX523

  • Equipped With Ventrac Mount System
  • up to 54" working width
  • hydraulically activated discharge chute can rotate 220 degrees all from the operators seat
  • 40' of snow throwing distance

Starting at : call for price

Ventrac Snow Blowers are built for commercial snow clearing operations of sidewalks, driveways, and other areas. Available in width options of 48″ and 52″, these two stage snow blowers feature a 16″ diameter solid auger for best snow transfer, a large 20″ diameter fan, and the ability to launch snow at distances up to 40 feet.

KX480

KX480

  • Equipped With Ventrac Mount System
  • 48" working width
  • Up to 40' snow throwing distance
  • 180 degree chute rotaion

Starting at call for price

Ventrac Snow Blowers are built for commercial snow clearing operations of sidewalks, driveways, and other areas. Available in width options of 48″ and 52″, these two stage snow blowers feature a 16″ diameter solid auger for best snow transfer, a large 20″ diameter fan, and the ability to launch snow at distances up to 40 feet.

KC220

KC220

  • Equipped With Ventrac Mount System
  • 6" cutting depth with an 18" cutter wheel
  • 16 3 sided carbide cutters for lasting tip life
  • A special convex mirror mounted to the tractor provides operator visibility to the front cutting edge.

Starting at call for price

The KC220 Stump Grinder makes quick work of unwanted stumps and roots. Heavy-duty carbide cutters provide extended and effective performance in spite of dirt, stones, and debris in work area.

KL480

KL480

  • Equipped With Ventrac Mount System
  • Chain drives rotor group for heavy duty performance
  • 48" working width
  • 6" working depth

Starting at call for price

The KL480 Tiller is designed for easy preparation of gardens and yards. This power-driven front-end attachment allows the operator to easily monitor the Tiller’s performance. Designed with the Ventrac Mount System, the Tiller can be attached in a minute or less and comes with a stand for storing the Tiller when not in use.

HQ682

HQ682

  • Equipped With Ventrac Mount System
  • 68" working width
  • Height of cut range from 3" to 7"
  • Cuts down 6 foot tall grass and up to 2" thich brush

Starting at call for price

The HQ682 Tough Cut Mower is designed for mowing high grass, thick weeds, and heavy brush. A large baffled front opening helps direct materials into the deck and helps hinder debris from escaping.

KW452

KW452

  • Intermitten windshield wiper function
  • Removable in under an hour
  • Dual port USB charger
  • Optional heater kit

Starting at call for price

Designed to fit the Ventrac 4500 tractors, the KW452 Cab offers exceptional visibility, while providing the operator with protection and comfort in many weather conditions.

KH500

KH500

  • 500lb lifting capacity
  • 6' 4" lift height
  • Equipped With Ventrac Mount System
  • Working width 48" bucket

Starting at call for price

The Ventrac KH500 VERSA-Loader is one attachment capable of performing several different tasks. The VERSA-loader offers you a standard 5 cubic foot bucket capable of lifting 500 pounds over 6 feet high. The versatile design allows you disconnect and get attached to other optional attachments in minutes without tools or heavy lifting.

RV602

RV602

  • 16 Cubic feet max load capacity
  • Dumping height 5'
  • lifting capacity 300lbs
  • 5 blade impeller

Starting at call for price

The Ventrac RV602 VACUUM COLLECTION SYSTEM* is for grass and leaf collection, and it consists of three primary components: The Bin Assembly – mounts to the rear of 4000 series tractors, The Suction/Blower System – powered by a 10HP Vanguard engine with electric start for efficient pickup and superior performance, High Lift Mechanism – hydraulically raise the collection bin up to five feet and dump to unload the contents into a garbage bin or trailer.

ET202

ET202

  • Equipped With Ventrac Mount System
  • 175mph blowing force
  • 360 Degree hydrulic controled chute rotaion
  • 12" nozzle for mass airflow

Starting at call for price

The Ventrac ET202 makes quick work of any clean up job. The Turbine Style Blower is designed to blow large volumes of air, and is much quieter than a conventional leaf blower. The ET20 can be used to blow leaves, light snow, and remove debris from sidewalks, parking lots and other areas

KY400

KY400

  • Equipped With Ventrac Mount System
  • Trenching depth 40"
  • 5 1/2" trenching width
  • Less ground pressure keeps unwanted turf damage to a minimal

Starting at call for price

The KY400 Trencher is capable of trenching up to 40 inches (102 cm) in depth with a 5½ inch (14 cm) wide cut. It is designed with dual Push-N-Pull cylinders to assure positive boom control for digging, boom lift, and transport.

ES220

ES220

  • Mount on standard 2" receiver
  • Hopper Capacity 220lbs
  • Spreads anywhere from 6' to 25'
  • Hopper made with Poly material so no rust or oxidation will occur

Starting at : call for price

The versatile Ventrac Spreader ES220 is designed and built to spread Seed, Fertilizer and Penn Mulch. The spreader is capable of being rear* or front mounted**. An electronic control box comes standard and features an electronic speed control and On/Off switch.

KA160

KA160

  • Equipped With Ventrac Mount System
  • 4000CFM's 180mph wind speed
  • 180 Degree hydraulic rotation side to side directional
  • Gauge wheels to follow ground contour withouth turf damage

Starting at call for price

The revolutionary KA160 Power Blower features a vertical shaft design that delivers a powerful, yet quiet performance. The blower can be used to remove leaves, light snow, water, etc.

KJ520

KJ520

  • Equipped With Ventrac Mount System
  • 52" width operational down to 48" angled with 24" diameter broom
  • Top mounted hydraulic motor for broom drive lets you use either side of broom for tight areas
  • Adjustable speed, direction, and rotation from the operator seat

Starting at call for price

The KJ520 Narrow Broom is designed for sweeping and removal of material such as snow, leaves, dirt, light gravel, and even thatch. It is designed to fit narrow walkways, operational on a 48in walk.

HB580

HB580

  • Equipped With Ventrac Mount System
  • 58" Width broom 21" Diameter
  • 220 RPM @ 3200 engine RPM
  • Adjustable speed, direction, and rotation from the operator seat

Starting at call for price

The HB580 Power Broom is designed for sweeping and removal of material such as snow, leaves, dirt, light gravel, and even thatch. A corner-less frame design permits sweeping against curbs and allows for the cleaning of corners.

EF300

EF300

  • Equipped With Ventrac Mount System
  • 8" dual stack bristles for a clean sweep and unharmful to the turf
  • Adjustable Caster wheels for longterm use
  • 78" in width and 50" in height

Starting at call for price

The Ventrac EF300 leaf plow is the fastest way to move deep layers of leaves. As the leaves pile up in the fall, they can often stack up faster than a blower can handle – this is where the Leaf Plow excels. This attachment is designed to save users hours and hours of painstaking leaf cleanup.

MS600

MS600

  • Equipped With Ventrac Mount System
  • 60" Side discharge
  • Easy quick height adjustment from 1" to 5"
  • 4 1/2" Rear roller for better stripe and long bearing life

Starting at call for price

The Ventrac family of MS/MT/MU finish mower decks are designed to cut grass quickly, efficiently, and with endless precision. The result is a beautifully striped lawn, time after time. Professionals and hobbyists alike enjoy the many features that these decks provide. Standard quick, single-lever height adjustments, full length rear rollers, high strength steel deck construction, and industrial quality components combine with the optional hydraulic flip-up and mulch kits to result in exactly what customers have come to expect from Ventrac – the best mower decks money can buy.

MS720

MS720

  • Equipped With Ventrac Mount System
  • 72" Side discharge
  • Easy quick height adjustment from 1" to 5"
  • 4 1/2" Rear roller for better stripe and long bearing life

Starting at call for price

The Ventrac family of MS/MT/MU finish mower decks are designed to cut grass quickly, efficiently, and with endless precision. The result is a beautifully striped lawn, time after time. Professionals and hobbyists alike enjoy the many features that these decks provide. Standard quick, single-lever height adjustments, full length rear rollers, high strength steel deck construction, and industrial quality components combine with the optional hydraulic flip-up and mulch kits to result in exactly what customers have come to expect from Ventrac – the best mower decks money can buy.

MT720

MT720

  • Equipped With Ventrac Mount System
  • 72" Offset side discharge
  • Easy quick height adjustment from 1" to 5"
  • Offset deck for fence mower or other close quarter mowing

Starting at call for price

The Ventrac family of MS/MT/MU finish mower decks are designed to cut grass quickly, efficiently, and with endless precision. The result is a beautifully striped lawn, time after time. Professionals and hobbyists alike enjoy the many features that these decks provide. Standard quick, single-lever height adjustments, full length rear rollers, high strength steel deck construction, and industrial quality components combine with the optional hydraulic flip-up and mulch kits to result in exactly what customers have come to expect from Ventrac – the best mower decks money can buy.

MU720

MU720

  • Equipped With Ventrac Mount System
  • 72" rear discharge
  • Easy quick height adjustment from 1" to 5"
  • 4 1/2" Rear roller for better stripe and long bearing life

Starting at call for price

The Ventrac family of MS/MT/MU finish mower decks are designed to cut grass quickly, efficiently, and with endless precision. The result is a beautifully striped lawn, time after time. Professionals and hobbyists alike enjoy the many features that these decks provide. Standard quick, single-lever height adjustments, full length rear rollers, high strength steel deck construction, and industrial quality components combine with the optional hydraulic flip-up and mulch kits to result in exactly what customers have come to expect from Ventrac – the best mower decks money can buy.

MA900

MA900

  • Equipped With Ventrac Mount System
  • 115" horizontal reach 142" Vertical reach
  • 39" hydraulicly driven cutter head
  • 18 degree working capability with dual wheels

Starting at call for price

The Ventrac Boom Mower is unquestionably the easiest and most productive boom mower in its class. Designed to deliver unprecedented levels of efficiency for property managers who want to maintain difficult areas with minimal labor, the Boom Mower has the stability and reach to manage vegetation further away from the machine than other equipment. With this new attachment, mowing around water features, trimming hedges, and clearing trails has never been so easy. Schedule your demo to see how the Ventrac Boom Mower will save you time and money.

MK960

MK960

  • Equipped With Ventrac Mount System
  • 95" read discharge cutting width
  • Able to mow a Soccer field in 15 minutes
  • Full width stripping roller for superior after cut apperance

Starting at call for price

Increased productivity just got easier with this 95″ mowing deck. The cut range of 1″ to 5″ allows for an adaptable height on finish grass. The tool-free height adjusts quickly Designed with a rear discharge, the WAM makes an excellent choice for mowing in public areas where mower debris is a concern. The rear discharge also makes for easy trimming from either side of the deck. and easily with two levers, offering an advantage over other mower decks in its class.

EA600

EA600

  • Equipped With Ventrac Mount System
  • 97 holes per square meter
  • No Core Taken for little to no cleanup
  • Seedbox availible for one pass overseeding while aerating.

Starting at call for price

The AERA-vator is designed to stir and loosen the soil beneath the sod without destroying the turf. The EA600 creates a core hole without bringing a core plug to the surface, leaving the turf ready for use immediately after treatment. Nine holes are created each foot (97 holes per square meter) and hole size is regulated by drive speed– the slower the drive speed, the larger the hole. The AERA-vator works best in dry un-irrigated ground leaving a core hole while fracturing the sub soil.

DG550

DG550

  • Equipped With Ventrac Mount System
  • Hydraulicly controlled tine adjustment for smooth field conditions
  • Weed removal hydraulicly adjusted to remove or not be engaged with field
  • Moves heavy material quickly

Starting at call for price

Grounds maintenance professionals know the value of reducing or eliminating hand work and they appreciate premium results. This is what the Ventrac Ballpark Groomer brings to the table. Ventrac is the solution for efficient ball field maintenance that also elevates the image and quality of the facility.

DR540

DR540

  • 28 spikes for grooming
  • 6 inch roller for smooth finish
  • multiple drags availible for desired finish
  • Hydraulicly adjustable top link availible

Starting at call for price

Grounds maintenance professionals know the value of reducing or eliminating hand work and they appreciate premium results. This is what the Ventrac Ballpark Groomer brings to the table. Ventrac is the solution for efficient ball field maintenance that also elevates the image and quality of the facility.

KD722

KD722

  • Equipped With Ventrac Mount System
  • 72 inch straight blade with power angle
  • Operatable in trip or locked for plowing or grading
  • PolyEdge availible

Starting at call for price

Ventrac KD Power Angle Blades have working widths of 48, 60, and 72 inches (122, 152, 183 centimeters). All control functions are performed with the S.D.L.A. control for raising and lowering the blade or angling it left or right. Adjustable skid shoes accommodate dozing at selected heights, such as moving snow on gravel driveways.

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today:

Select a Product to View Details:

Call Your Nearest PowerPro Location Today: